ALMAZ Oilfield Service

Made by Empire Web

КИПпБП-140

Flat cable for electric pump units with copper cores, with insulation of the first layer made of polyimide-fluoroplastic film, insulation of the second layer made of a compound of propylene with

Characteristics

Heat resistance: 140°C

Available cross-sections: 7, 8, 10, 13, 16, 21, 25
and 35 mm2

Temperature resistance: -60 ° C
Rated voltage: 3,300 and 4,000V
AC voltage frequency: 30 to 200 Hz
Allowed short-term (up to 36 hours) overheating of up to 160 °C
Permissible voltage – 4,500 V

The cables are manufactured for the needs of the national economy and for export. Type of climatic version – UHL (NF), placement category 1 and 5 according to GOST 15150 and in reservoir fluid

Decoding of the identifier for the submersible heat-resistant cable

К
cable with copper cores

Characteristics of downhole conditions

Parameters of downhole conditions Standard design Corrosion-resistant design
Produced water pH factor 5,0-8,5 3,0-9,5
Maximum mass concentration of solid particles, % (г/л) 0,1 (1,0) 0,1 (1,0)
Microhardness of particles (on the Mohs scale), max 7 7
Maximum content of produced water, % 100 100
GOR of reservoir fluid, max, m3/t not limited not limited
Hydrostatic pressure, max, MPa (kgf/cm2) 40 (400) 40 (400)
Maximum H2S concentration, % (г/л) 0,001 (0,01) 0,125 (1,25)
Maximum concentrationСО2, % (г/л) - 0,115 (1,15)
Maximum concentration Сl-   ,% (г/л) - 7,5 (75)
Maximum concentration НСО3 ,% (г/л) - 0,1(1)
Maximum concentration SO 2-,% (г/л)
4
- 0,2 (2)
Maximum concentration Са2+,% (г/л) - 0,9 (9)
Maximum concentration (Na++K + ),% (г/л) - 7,0 (70)
Maximum temperature of well fluid or gas-air medium (applies to ESP), max, °C in the cable identifier in the cable identifier

Design weight of 1 km of cable, kg

Cable type Number and nominal cross-section of cores
3х7 3х8 3х10 3х13,3 3х16 3x21,15 3х25 3х35
КИПпБП–125 КИПпБП–140 648,3 650,6 750,7 850,3 976,7 1260 1368 1730